Skip to content
DE
Menu
Send a photo

Graffiti removal

Graffiti removal in Berlin and Brandenburg – by laser, without chemicals

For property managers, businesses and owners. We take the paint off layer by layer and leave the surface underneath intact.

from €590up to 5 m², incl. VAT · Businesses: annual contract €4,900 excl. VAT

Free 30 × 30 cm test patch – no result, no invoice.

We are taking enquiries now. On-site work starts in January 2027.

Footage from our training
Graffiti on concrete. The laser removes the paint pass by pass. White balance corrected, otherwise unedited.

We remove graffiti from render, brick, concrete, natural stone and metal with a pulsed laser – in Berlin, Potsdam and Brandenburg. Up to 5 m² costs a flat €590 including VAT. No chemical residue and no blasting grit are left behind, only dust in the extraction filter.

The trouble with solvents and grit

A tag on a courtyard gate or across a shopfront takes seconds to spray. Remove it with solvent and you often see a ghost afterwards: the paint has soaked into the pores. Acidic cleaners react with the binder in the render and can form salts.

Sandblasting takes the paint off – along with part of the surface. Brick loses its fired skin, mortar joints get washed out, and the wall gets dirty faster than before.

A laser works differently. The dark paint absorbs the energy and breaks up into fine particles, which the extraction nozzle at the head catches. We go over the area until the paint is gone and stop once the original surface shows.

The laser at work

Footage from our training
Black spray paint on concrete block. The bright spot is where the laser is working.
Concrete wall with blue graffiti and a rectangular cleaned patch in the middle.Footage from our training
Test patch on concrete. The texture of the concrete is still there inside the patch.

Which surfaces it works on

Suitable surfaces

  • Render and concrete – works well, even on rough surfaces
  • Brick – works well; we can leave the patina if you prefer
  • Granite – works very well
  • Metal: steel, galvanised surfaces, aluminium – works very well, the zinc layer stays
  • Wood – possible if the paint has not soaked deep into the grain

Only after a test, or not at all

  • Sandstone – only damp and after a test
  • Marble and limestone – only after a test, as the stone can turn yellowish
  • Blue and very light paint – absorbs the energy poorly; the test shows whether it works
  • Plastic, such as window frames or signs – we do not clean it

What graffiti removal costs

Prices include VAT. Included: travel within Berlin (zone 1), fencing, extraction, dust disposal. Property managers can take an annual contract: 12 visits a year, response within 48 hours, up to 5 m² per visit – €4,900 a year excl. VAT.

All prices

What graffiti removal costs
up to 5 m²€590 flat
5–15 m²€59 per m², minimum €590
over 15 m²quote after a site visit
Anti-graffiti coating afterwards€19 per m²

How the job runs

  1. Photo

    A photo of the area, the postcode, the rough size.

  2. Fixed price

    Within 24 hours on working days.

  3. Date

    At short notice for property managers on an annual contract.

  4. Cleaning

    Fencing, laser, extraction – the pavement stays clean.

  5. Report

    Before and after photos, area, time spent. For your records or your insurer.

Limits – and when we say no

  • Above 15 m² we only quote after a site visit. We do not clean whole façades – other methods are more economical for that.
  • On listed buildings we only work with written approval from the heritage authority.
  • If paint has soaked deep into soft stone or wood, a ghost may remain. The test patch shows this beforehand.
  • We do not work on buildings from before 1993 where asbestos in the render or coating is possible. That needs a specialist contractor licensed under TRGS 519.

Laser compared with other methods

MethodSurfaceResidueSuited to
Laser (pulsed)not attacked with the right settings; test neededonly dust in the filterdetail, lettering, carvings, metal, small and medium areas
Sandblastingremoves surface material, washes out jointsspent grit and dustlarge steel areas, surface profile before painting
Chemical cleanerscan react with binders; ghosting with graffiticontaminated waste waterlarge areas with even dirt
Dry icegentle; on rust removes only the surface bloomthe dirt that came offmachinery, moulds, wood
Pressure washingrisky on façades from about 80 bar; soaks insulation300–600 l of water an hourrobust surfaces without insulation

Figures from technical literature and manufacturer data, rounded. Costs in Germany vary widely by job.

Safety on site

We work with a class 4 laser. That is why we fence off the work zone with tape and a warning sign and only fire the laser when nobody else is inside. Anyone in the zone wears laser safety goggles. Dust is extracted right at the laser head. With old paint we assume lead: we wear respiratory protection, and the used filter goes to a licensed waste contractor. The site stays clean for you, your tenants and passers-by.

Frequently asked questions

Does the laser leave a ghost?

On metal, granite, concrete and render, usually not. On absorbent stone or wood a faint shadow can remain if the paint soaked in deeply. The test patch shows it in advance.

How long does it take?

On metal we reckon with 3–5 m² an hour, on brick and concrete 1–2 m², on natural stone under 1 m². A typical tag on a courtyard gate takes half a day.

Who pays for graffiti removal?

That depends on the case – your building insurance or the service charges may cover it. We give you a report with photos, area and time spent that you can use for this.

What about the pavement and the neighbours?

We fence off the work zone and extract the dust right at the laser head. No water runs across the pavement and there is no solvent smell.

Can you protect the wall afterwards?

Yes, with an anti-graffiti coating at €19 per m². New paint then comes off more easily.

What is an annual contract?

For property managers and businesses: 12 visits a year, response within 48 hours, up to 5 m² per visit, for €4,900 a year excl. VAT. Each extra visit costs €390 excl. VAT.

Enquiry

One photo is enough for a fixed price

This is what a test patch looks like: 30 × 30 cm, framed with masking tape, the old condition right next to it. It is where you decide whether we carry on.

  1. You receive the fixed price

    Within 24 hours. If something is missing, we ask one specific question.

  2. We clean a test patch

    30 × 30 cm on your object. If the result does not convince you, you pay nothing.

What needs cleaning?
We use it to work out the travel.
An estimate is enough.
We send the fixed price there.
For questions. We only call if something is unclear.
More details, if you like
For example: what is dirty, where is the object, how do we get to it?

We use your details and photos only to handle your enquiry. See the privacy notice for details.

Send a photo – fixed price within 24 hours